Friend Ivan Snyder giving the Linotype a go

Friend Ivan Snyder giving the Linotype a go a video by Stumptown Printers on Flickr.
Here's our pal Ivan Snyder sitting at the Stumptown Printers Linotype. This guy has volunteered more time, sweat, muscle, know-how, equipment, etc. to the current Portland printing community than any one I know. He has helped usher in a new generation of Portland letterpress printers who appreciate the real deal and love working with metal type. Thanks Ivan!

Notes to self: inventory mats before running

Tonight I tried running new-to-me mats. I have a better idea of how many mats fit in a half magazine, because I discovered that I had way too many. I bet there is a lower case "e" count that would allow one to quickly determine if there are too many mats to fit. So, self, check it out. Also, please inventory mats before taking the time to load them into a magazine. After what appeared to be a full font, I discovered I only have one (.). This is a problem. Anyway. Always learning. But never seem to learn that you can never have enough patience for this machine.

Trust the spacebands....

Below is a scan of a proof of some lines cast this past weekend for a friend. 8pt Linotype Paragon set on 23 pica line, regular justification. I let the space bands do their work, and wanted to learn their tolerances and get used to how a line would space out according to how many spaces bands were used vs. word size, etc. I figured this face could handle some "gappy" word spaces, but I was surprised at how this composition appears fairly consistent. Even though there are some lines with ambitious word spacing, none of them stand out as being too obnoxious with noticeable "holes" or "rivers" in the composition.

What I learned: generally speaking, space bands have a "spread" of 3 pts, so if you have at least 5 space bands in a line, they will easily take up a pica worth of space.  I'll add a separate post which will describe the markings and different thickness of Linotype spacebands.

Another thing I was reminded of after setting these lines are the rules for indentation. For commercial work, the rule of thumb is to indent paragraphs by an em for lines set up to 20 picas. 1.5 ems for lines up to 25 picas, and 2 ems for lines above 25 picas. Of course depending on type size, leading, etc. there are exceptions. But after looking at the paragraphs I set below, I think my 2 em indentations are a bit too aggressive.  I referenced the book "Linotype Keyboard Operation" for the refresher.

Oh, after clicking on this photo to take a closer look, I noticed something else. See the lower case "i" with a problem? I'll have to run the mats out and have a look at them. 

Portland, Oregon Premier of Linotype: The Film 

Speaking of the American Typecasting Fellowship Conference, here's a conference event that is open to the public. Should be a fun time, and a good way to keep cool tomorrow.

Portland, Oregon Premier of:
Linotype: The Film 

When: Thursday, August 16th
Time: 6pm doors, Meet & Greet | 7:00pm Screening followed by Q&A
Where: McMenamins Kennedy School Theater | 5736 N.E. 33rd Ave. 
Admission cost: $10 (Free to conference attendees)
(advance tickets available at Stumptown Printers or online)

Film Screening, Meet & Greet with Linotype operators and master craft printers from around the country and here at home. Also Q&A with “Linotype: The Film” filmmaker

Plus! After the film, Kyle Durrie will have her "Moveable Type Truck" on site, and will invite folks aboard to print a commemorative Linotype keepsake.

Presented by the C. C. Stern Type Foundry in conjunction with the American Typecasting Fellowship Conference, and is funded in part by the Regional Arts & Culture Council.


Linotype: The Film is a feature-length documentary centered around the Linotype type composing machine. Called the “Eighth Wonder of the World” by Thomas Edison, it revolutionized printing and society. The film tells the charming and emotional story of the people connected to the Linotype and how it impacted the world.

C.C. Stern Type Foundry Located in Portland, Oregon, The C.C. Stern Type Foundry is a working museum dedicated to preserving the art and industry of the cast letterform, letterpress type. With one of the largest collections of Monotype casting matrices in the United States, the C.C. Stern Type Foundry honors the memory of C. Christopher Stern, who built and operated the foundry at Stern & Faye, Printers of Sedro-Woolley, Washington.

2012 American Typecasting Fellowship Conference Since 1978, The American Typecasting Fellowship Conference is a biennial meeting of enthusiasts, amateur and professional, interested in all aspects of the making of metal type used for letterpress printing. This group is central to what is becoming a renaissance of typefounding in America.

Poster Composition cast on the Stumptown Printers' Linotype Model 31

Poster Composition cast on the Stumptown Printers' Linotype Model 31

 

 

 

Mold 10-18 F7660

Couple stupid things I did while casting this evening:

1. Fired up the machine after a long day of regular job printing. (Not the best idea to attempt to cast while not quite on the ball.)

2. Attempted to cast the second position of a 14 pt (regular 2 letter) matrices using a 10-18 F7660 mold.

3. Tried it again.

4. Wondered why the machine was squirting.

Lesson (note to self): Don't do that. First position is no problem but second will not work. Check positioning of mat on mold before attempting to cast. And, do a little research on this particular mold: Mold 10-18 F7660.